Motor Controllers & Motion Software

• 2-axis and 4-axis programmable controllers feature advanced closed loop motor-encoder control system
• PID filter uses sophisticated math to automatically compensate for variations in friction and load, producing exceptionally smooth, accurate velocity and settle times under 1/2 second
• Safety features include obstruction sensing and power overload protection
• Use with Semprex advanced motor stages or with other closed loop DC servo motor-encoder control systems (see input/output below)
• Powerful, user-friendly AMICron motion software included (see below).
• Dynamic Link Library (DLL) included for easy programming into new or existing applications

SPECIFICATIONS:
Power Input:       110 or 220 VAC, 120 W (internal switch)
Motor Output:    24 VDC, 4 A max (standard)
                        12 VDC, 5 A max (optional)
Encoder Input:   2- phase 5 VDC TTL
Interface:           RS232C (38.4 kbps)

      Stepper Motor Controller

• Versatile 4-axis micro-stepping controller for independent and simultaneous axis control
• Positive/negative drive sense, multiple acceleration profiles, backlash correction, & limit switch sensing
• Safety features include thermal & current protection
• Resolution of 1/64 full-step (0.028 deg with 200 step/rev motor)
• From 32 Hz to 512 KHz velocity (micro-steps/sec)

• Compatible with Image-Pro / Scope-Pro software from Media Cybernetics 

  SPECIFICATIONS
  Power Input:      +5/+12/-12 VDC from PC power supply 
  Motor Output:    10-28 VDC, 1.4A x phase current x number axes 
  Interface:           PCI Bus

Oasis Stepper Motor Controller
 

AMICron Motion Control Software

• Sophisticated stage motion software included with Semprex Advanced Servo Motor Controller
• Manual, programmable, and joystick control of stage movement
• Hand enter absolute and relative position movements
• Set velocity and acceleration from very slow smooth scanning at 8 micron/sec to rapid high speed positioning at 75 mm/sec
• Zero each axis individually or simultaneously
• Toggle between polar and rectangular coordinate systems
• Display in millimeters, micrometers, inches, degrees, and sectors
• Metrology functions include Distance, Circle Radius with Center, and Angle with Intersection
• De-skew function corrects part misalignment and compensates axes for linear motion
• Maintain up to 4 different origins plus 1 temporary origin
• Store special positions with descriptions in one of 8 Quick Buttons (i.e. Load, Start, etc.)
• Customize up to 12 joystick button functions
• Store up to 5,000 coordinates along with notes, measurement results, and classifications
• Customize classification text for each of 6 coordinate storage buttons
• Save coordinate data on disk to recall at a later date, and import or export data to other applications such as a spreadsheet for further analysis
• Powerful motion sequencer makes repetitive tasks efficient, allowing for automatic relative and absolute positioning, timed waits, repeat loops, subroutines, operator instruction prompts, and more
• Build a library of commonly used sequences by saving macros to disk, allowing operators to simply Load and Go
• Send ASCII commands to other RS232 communication ports (could be used to trigger other devices such as a camera)
  
  MINIMUM SYSTEM REQUIREMENTS:
  Windows 98/2000/XP/Vista/7 (32-bit only)
  One RS232 serial communications port or USB Adapter
  VGA Color Display (at least 800x600 recommended)