The STC-MC33USB is an ultra-compact, progressive scan, VGA, USB camera with a 1/3” color CCD. It features 60fps, hardware and software triggering image capture, digital zoom and a feature-rich user based menu setup and control. The STC-MC33USB is a cased model available with a rear mini-USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.
· 1/3" CCD Image Sensor, VGA (0.3 Megapixel)
· Ultra-Compact Size
· Hardware & Software Trigger
Name |
Specifications |
|
Model No |
STC-MC33USB |
|
Image Sensor |
1/3” Interline VGA color progressive CCD: ICX424AQ (Sony) |
|
Total Picture Element |
692 (H) x 504 (V) |
|
Effective Picture Element |
659 (H) x 494 (V) |
|
Chip Size |
5.79 (H) x 4.89 (V) mm |
|
Cell Size |
7.40 (H) x 7.40 (V) µm |
|
Scanning System |
Progressive |
|
Resolution |
640 (H) x 480 (V) (Full scanning) 640 (H) x 224 (V) (1/2 partial scanning) 640 (H) x 80 (V) (1/4 partial scanning) |
|
Scanning Methods |
Full scanning, 1/1 partial scanning, 1/2 partial scanning, 1/4 partial scanning, Variable partial scanning |
|
Maximum Frame Rate |
- |
|
- Full Scanning |
59.94 fps (Normal) / 29.97 fps (1/2 clock) / 14.98 fps (1/4 clock) / 89.91 fps (3/4 clock) |
|
- 1/2 Partial Scanning |
120.11 fps (Normal) / 60.05 fps (1/2 clock) / 30.02 fps (1/4 clock) / 180.165 fps (3/4 clock) |
|
- 1/4 Partial Scanning |
240.22 fps (Normal) / 120.11 fps (1/2 clock) / 60.055 fps (1/4 clock) / 360.33 fps (3/4 clock) |
|
Pixel Frequency |
24.5454 MHz (Normal) / 12.2727 MHz (1/2 clock) / 6.13635 MHz (1/4 clock) / 36.818 MHz (3/4 clock) |
|
Video Output |
8bit / 10bit / 12bit |
|
Minimum Scene Illumination |
18 Lux at F1.2 |
|
Sync System |
Internal |
|
Electronic Shutter |
Auto / Manual (software selectable) |
|
- Normal |
1/24,545,455 to 1/59.94 seconds |
|
- 1/2 Clock |
1/12,272,727 to 1/29.97 seconds |
|
- 1/4 Clock |
1/6,136,364 to 1/14.99 seconds |
|
- 3/4 Clock |
1/36,818,181 to 1/89.91 seconds |
|
Gain |
Auto / Manual (software selectable) |
|
Gamma |
Manual (software selectable) |
|
White Balance |
Auto / Manual / One shot (software selectable) |
|
Trigger Mode |
Free-run / Edge preset trigger / Pulse width trigger / Start & stop trigger (software selectable) |
|
Input / Output |
USB 2.0 High Speed |
|
Power |
- |
|
- Input Voltage |
+5 Vdc through USB connector (+4.4 to +5.25V) |
|
- Consumption |
< 420 mA |
|
Dimensions |
28 (W) x 28 (H) x 37 (D) mm (excluding connector) |
|
Lens Mount |
CS mount |
|
Weight |
Approximately 45g |
|
Interface Connector |
USB: mini-B USB connector IO signal: 6pin connector (HR10A-7R-6PB or equivalent) |
|
Temperature |
- |
|
- Operational |
0 ~ 40 deg. C |
|
- Storage |
-30 ~ 65 deg. C |
|
Vibration |
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each |
|
Shock |
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each |
|
Standard Compliancy |
EMS: En61000-6-2, EMI: EN61000-6-3 (Class B) |
|
RoHS |
RoHS Compliant |
Features
· Color or Monochrome VGA ~ UXGA Resolution
· Low Light Extended Integration (w/ Complex Noise Reduction)
· Variable Partial Scan and Clock Speed Control
· Drawing / Annotation & Horizontal and Vertical Flip
· Standard USB or Lock Type Connectors
· DirectX, Twain, Linux, and Halcon Drivers
AH and ASH Models
· Precision Case w/ Heat Sink Design and LED Indicator
· Machine Vision Features
- Triggering (Hardware or Software Base)
- Integrated End Signal, Readout Signal Control
- 4 Configurable I/Os
USB 3.0 and 2.0 Series
High Performance, Versatile
These are compact, progressive scan, USB camera with a color or monochrome CCD, featuring software and / or hard triggering , image capture, digital zoom and a feature-rich user based menu set up and control. This series is available with a top or rear USB connector. Sentech USB cameras include a SDK, Direct X, Twain and Linux drivers, as well as the Sentech Viewing Software.
