SXVGA, Monochrome Camera
The STC-TB133USB-ASH is a compact, progressive scan, SXVGA, USB camera with a 1/3” monochrome CCD. It features 22fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control. The STC-TB133USB-ASH is a cased model available with a rear mini-USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.
· 1/3" CCD Image Sensor, SXGA (1.25 MP)
· Signal Output over 12pin Connector, 22fps
· Hardware & Software Trigger
Name |
Specifications |
Model No |
STC-TB133USB-ASH |
Imager |
1/3” Interline SXVGA Monochrome Progressive CCD: ICX445AL |
Total Picture Element |
1348 (H) x 976 (V) |
Active Picture Element |
1296 (H) x 966 (V) |
Chip Size |
6.26 (H) x 5.01 (V) mm |
Cell Size |
3.75 (H) x 3.75 (V) µm |
Scanning System |
Progressive |
Scanning Methods |
Full Scanning, 1/1 Partial Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning 1/2 Partial Scanning, Binning 1/4 Partial Scanning, Binning Variable Partial Scanning |
Pixel Frequency |
36.818 MHz (Normal) / 18.4090 MHz (1/2 clock) / 9.20453 MHz (1/4 clock) |
Maximum Frame Rate |
- |
- Full Scanning |
22.40 fps (Normal) / 11.20 fps (1/2 clock) / 5.600 fps (1/4 clock) |
- 1/2 Partial |
44.81 fps (Normal) / 22.40 fps (1/2 clock) / 11.20 fps (1/4 clock) |
- 1/4 Partial |
89.80 fps (Normal) / 44.90 fps (1/2 clock) / 22.45 fps (1/4 clock) |
Resolution |
1280 (H) x 960 (V) (Full Scanning) 1280 (H) x 440 (V) (1/2 Partial Scanning) 1280 (H) x 168 (V) (1/4 Partial Scanning) |
S/N Ratio |
≤ 10 digit (Factory Default Gain Setting) |
Minimum Scene Illumination |
0.18 Lux at F1.2 |
Sync System |
Internal |
Electronic Shutter |
Auto / Manual (Software Selectable) |
- Normal |
1/36,818,182 to 1/22.40 seconds |
- 1/2 Clock |
1/18,409,091 to 1/11.20 seconds |
- 1/4 Clock |
1/9,204,545 to 1/5.60 seconds |
Gain |
Auto / Manual (Software Selectable) |
Gamma |
Manual (Software Selectable) |
White Balance |
Auto / Manual / One shot (Software Selectable) |
Trigger Mode |
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable) |
Input / Output |
USB2.0 High Speed |
Power |
- |
- Input Voltage |
+5 Vdc through USB connector or 12Pin connector |
- Consumption |
Less than 430 mA |
Dimensions |
50 (W) x 50 (H) x 35.8 (D) mm |
Lens Mount |
CS Mount |
Input / Output Connector |
12 Pin Connector (Hirose) / 2.5 mm Pin Jack |
Tripod |
1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top, bottom and both side of case |
Weight |
Approximately 112g |
Operating Temperature |
0 to 40 deg. C |
Storage Temperature |
-30 to 65 deg. C |
Vibration |
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each |
Shock |
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each |
Standard Compliancy |
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B) |
RoHS |
RoHS Compliant |