Shopping Bag
Sentech USB 2.0 (Triggered) Mono Camera STC-TB152USB-AH
Sentech USB 2.0 (Triggered) Mono Camera STC-TB152USB-AH

Sentech USB 2.0 (Triggered) Mono Camera STC-TB152USB-AH

Please email for Price Quote and Options
Part Number:STC-TB152USB-AH
Sentech USB 2.0 (Triggered) Mono Camera STC-TB152USB-AH

SXGA, Monochrome Camera

The STC-TB152USB-AH is a compact, progressive scan, SXGA, USB cased camera with a 1/2” monochrome CCD, featuring 19fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control. This cased camera is the same as the ASH model except that the USB signal is output over the USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.

·         1/2" CCD Image Sensor, SXGA (1.25 Megapixel)

·         Output over USB Connector, 19fps

·         Hardware & Software Trigger



Model No
1/2” Interline SXGA Monochrome Progressive CCD: ICX205AL
Total Picture Element
1434 (H) x 1050 (V)
Active Picture Element
1280 (H) x 1024 (V)
Chip Size
7.60 (H) x 6.20 (V) mm
Cell Size
4.65 (H) x 4.65 (V) µm
Scanning System
Scanning Methods
Full Scanning, 1/1 Partial Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning 1/2 Partial Scanning, Binning 1/4 Partial Scanning, Binning Variable Partial Scanning
Pixel Frequency
36.818 MHz (Normal) / 18.4090 MHz (1/2 clock) / 9.20453 MHz (1/4 clock)
Maximum Frame Rate
- Full Scanning
19.26 fps (Normal) / 9.63 fps (1/2 clock) / 4.815 fps (1/4 clock)
- 1/2 Partial
38.52 fps (Normal) / 19.26 fps (1/2 clock) / 9.63 fps (1/4 clock)
- 1/4 Partial
77.04 fps (Normal) / 38.52 fps (1/2 clock) / 19.26 fps (1/4 clock)
Full Scanning:1280 (H) x 1024 (V) 1/2 Partial Scanning: 1280 (H) x 476 (V) 1/4 Partial Scanning: 1280 (H) x 184 (V)
S/N Ratio
≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination
0.12 Lux at F1.2
Sync System
Electronic Shutter
Auto / Manual (Software Selectable)
Auto / Manual (Software Selectable)
Manual (Software Selectable)
White Balance
Trigger Mode
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable)
Input / Output
USB2.0 High Speed
- Input Voltage
+5 Vdc through USB connector or 12Pin connector
- Consumption
Less than 450 mA
50 (W) x 50 (H) x 40.8 (D) mm
Lens Mount
C Mount
Input / Output Connector
12 Pin Connector (Hirose) / 2.5 mm Pin Jack
1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top, bottom and both side of case
Approximately 130g
- Operational
0 to 40 deg. C
- Storage
-30 to 65 deg. C
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS Compliant

USB 3.0 and 2.0 Cameras


·         Color or Monochrome VGA ~ UXGA Resolution

·         Low Light Extended Integration (w/ Complex Noise Reduction)

·         Variable Partial Scan and Clock Speed Control

·         Drawing / Annotation & Horizontal and Vertical Flip

·         Standard USB or Lock Type Connectors

·         DirectX, Twain, Linux, and Halcon Drivers

AH and ASH Models

·         Precision Case w/ Heat Sink Design and LED Indicator

·         Machine Vision Features

- Triggering (Hardware or Software Base)

- Integrated End Signal, Readout Signal Control

- 4 Configurable I/Os

USB 3.0 and 2.0 Series

High Performance, Versatile

These are compact, progressive scan, USB camera with a color or monochrome CCD, featuring software and / or hard triggering , image capture, digital zoom and a feature-rich user based menu set up and control. This series is available with a top or rear USB connector. Sentech USB cameras include a SDK, Direct X, Twain and Linux drivers, as well as the Sentech Viewing Software.






Recently Viewed Items