SXGA, Monochrome Camera
The STC-TB152USB-ASH is a compact, progressive scan, SXGA, USB cased camera with a 1/2” monochrome CCD, featuring 19fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control. This series is available as a cased version with a rear mini USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.
· 1/2" CCD Image Sensor, SXGA (1.3 Megapixel)
· Signal Output over 12pin Connector, 19fps
· Hardware & Software Trigger
Name |
Specifications |
|
Model No |
STC-TB152USB-ASH |
|
Imager |
1/2” Interline SXGA Monochrome Progressive CCD: ICX205AL |
|
Total Picture Element |
1434 (H) x 1050 (V) |
|
Active Picture Element |
1360 (H) x 1024 (V) |
|
Chip Size |
7.60 (H) x 6.20 (V) mm |
|
Cell Size |
4.65 (H) x 4.65 (V) μm |
|
Scanning System |
Progressive |
|
Scanning Methods |
Full Scanning, 1/1 Partial Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning 1/2 Partial Scanning, Binning, 1/4 Partial Scanning, Binning Variable Partial Scanning |
|
Pixel Frequency |
36.818 MHz |
|
Maximum Frame Rate |
- |
|
- Full Scanning |
19.26 fps |
|
- 1/2 Partial |
38.52 fps |
|
- 1/4 Partial |
77.04 fps |
|
Resolution |
1360 (H) x 1024 (V) (Full Scanning) 1360 (H) x 472 (V) (1/2 Partial Scanning) 1360 (H) x 176 (V) (1/4 Partial Scanning) |
|
S/N Ratio |
≤ 10 digit (Factory Default Gain Setting) |
|
Minimum Scene Illumination |
0.12 Lux at F1.2 |
|
Sync System |
Internal |
|
Electronic Shutter |
Auto / Manual (Software Selectable) |
|
Gain |
Auto / Manual (Software Selectable) |
|
Gamma |
Manual (Software Selectable) |
|
White Balance |
Auto / Manual / One shot (Software Selectable) |
|
Trigger Mode |
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable) |
|
Input / Output |
USB2.0 High Speed (Mini B USB) |
|
Power |
- |
|
- Input Voltage |
+5 Vdc through USB connector or 12Pin connector |
|
- Consumption |
Less than 450 mA |
|
Dimensions |
50 (W) x 50 (H) x 40.8 (D) mm |
|
Lens Mount |
C Mount |
|
Input / Output Connector |
12 Pin Connector (Hirose) / 2.5 mm Pin Jack |
|
Tripod |
1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top and bottom case, 2-M4 depth 4 screw holes on both side of case |
|
Weight |
Approximately 112g |
|
Temperature |
- |
|
- Operational |
Temperature: 0 to 40 deg. C, RH: 0 to 85% (No condensation) |
|
- Storage |
Temperature: -30 to 65 deg. C, RH: 0 to 90% (No condensation) |
|
Vibration |
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each |
|
Shock |
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each |
|
Standard Compliancy |
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B) |
|
RoHS |
RoHS Compliant | |
|
