Shopping Bag
Sentech USB 2.0 (Triggered) Mono Camera STC-TB33USB-AH
Sentech USB 2.0 (Triggered) Mono Camera STC-TB33USB-AH

Sentech USB 2.0 (Triggered) Mono Camera STC-TB33USB-AH

Please email for Price Quote and Options
Part Number:STC-TB33USB-AH
Sentech USB 2.0 (Triggered) Mono Camera STC-TB33USB-AH 

VGA, Monochrome Camera

The STC-TB33USB-AH is a compact, progressive scan, VGA, USB cased camera with a 1/3” monochrome CCD, featuring 60fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control. This cased camera is the same as the ASH model except that the USB signal is output over the USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.

·         1/3" CCD Image Sensor, VGA (0.3 Megapixel)

·         Output over USB Connector, 60fps

·         Hardware & Software Trigger



Model No
1/3” Interline VGA Monochrome Progressive CCD: ICX424AL
Total Picture Element
692 (H) x 504 (V)
Active Picture Element
640 (H) x 480 (V)
Chip Size
5.79 (H) x 4.89 (V) mm
Cell Size
7.40 (H) x 7.40 (V) µm
Scanning System
Scanning Methods
Full Scanning, 1/1 Partial Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning 1/2 Partial Scanning, Binning 1/4 Partial Scanning, Binning Variable Partial Scanning
Pixel Frequency
24.5454 MHz (Normal) / 12.2727 MHz (1/2 clock) / 6.13635 MHz (1/4 clock)
Maximum Frame Rate
- Full Scanning
59.94 fps (Normal) / 29.97 fps (1/2 clock) / 14.98 fps (1/4 clock)
- 1/2 Partial
120.11 fps (Normal) / 60.05 fps (1/2 clock) / 30.02 fps (1/4 clock)
- 1/4 Partial
240.22 fps (Normal) / 120.11 fps (1/2 clock) / 60.055 fps (1/4 clock)
640 (H) x 480 (V) (Full Scanning) 640 (H) x 224 (V) (1/2 Partial Scanning) 640 (H) x 80 (V) (1/4 Partial Scanning)
S/N Ratio
≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination
0.08 Lux at F1.2
Sync System
Electronic Shutter
Auto / Manual (Software Selectable)
Auto / Manual (Software Selectable)
Manual (Software Selectable)
White Balance
Trigger Mode
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable)
Input / Output
USB2.0 High Speed
- Input Voltage
+5 Vdc through USB connector or 12Pin connector
- Consumption
Less than 350 mA
50 (W) x 50 (H) x 35.8 (D) mm
Lens Mount
CS Mount
Input / Output Connector
12 Pin Connector (Hirose) / 2.5 mm Pin Jack
1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top, bottom and both side of case
Approximately 130g
- Operational
0 to 40 deg. C
- Storage
-30 to 65 deg. C
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS Compliant

USB 3.0 and 2.0 Cameras


·         Color or Monochrome VGA ~ UXGA Resolution

·         Low Light Extended Integration (w/ Complex Noise Reduction)

·         Variable Partial Scan and Clock Speed Control

·         Drawing / Annotation & Horizontal and Vertical Flip

·         Standard USB or Lock Type Connectors

·         DirectX, Twain, Linux, and Halcon Drivers

AH and ASH Models

·         Precision Case w/ Heat Sink Design and LED Indicator

·         Machine Vision Features

- Triggering (Hardware or Software Base)

- Integrated End Signal, Readout Signal Control

- 4 Configurable I/Os

USB 3.0 and 2.0 Series

High Performance, Versatile

These are compact, progressive scan, USB camera with a color or monochrome CCD, featuring software and / or hard triggering , image capture, digital zoom and a feature-rich user based menu set up and control. This series is available with a top or rear USB connector. Sentech USB cameras include a SDK, Direct X, Twain and Linux drivers, as well as the Sentech Viewing Software.






Recently Viewed Items