Shopping Bag
Sentech USB 2.0 (Triggered) Mono Camera STC-TB33USB-ASH
Sentech USB 2.0 (Triggered) Mono Camera STC-TB33USB-ASH

Sentech USB 2.0 (Triggered) Mono Camera STC-TB33USB-ASH

Please email for Price Quote and Options
Part Number:STC-TB33USB-ASH
Sentech USB 2.0 (Triggered) Mono Camera STC-TB33USB-ASH
 

 VGA, Monochrome Camera

The STC-TB33USB-ASH is a compact, progressive scan, VGA, USB cased camera with a 1/3” monochrome CCD, featuring 60fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control. This series is available as a cased version with a rear mini USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.

·         1/3" CCD Image Sensor, VGA (0.3 Megapixel)

·         Signal Output over 12pin Connector, 60fps

·         Hardware & Software Trigger

Name

Specifications

Model No
STC-TB33USB-ASH
Imager
1/3” Interline VGA Monochrome Progressive CCD: ICX424AL
Total Picture Element
692 (H) x 504 (V)
Active Picture Element
640 (H) x 480 (V)
Chip Size
5.79 (H) x 4.89 (V) mm
Cell Size
7.40 (H) x 7.40 (V) µm
Scanning System
Progressive
Scanning Methods
Full Scanning, 1/1 Partial Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning, Binning, Binning 1/1 Partial Scanning, Binning 1/2 Partial Scanning, Binning 1/4 Partial Scanning, Binning Variable Partial Scanning
Pixel Frequency
24.5454 MHz
Maximum Frame Rate
-
- Full Scanning
59.94 fps
- 1/2 Partial
120.11 fps
- 1/4 Partial
240.22 fps
Resolution
640 (H) x 480 (V) (Full Scanning) 640 (H) x 224 (V) (1/2 Partial Scanning) 640 (H) x 80 (V) (1/4 Partial Scanning)
S/N Ratio
≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination
0.08 Lux at F1.2
Sync System
Internal
Electronic Shutter
Auto / Manual (Software Selectable)
Gain
Auto / Manual (Software Selectable)
Gamma
Manual (Software Selectable)
White Balance
-
Trigger Mode
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable)
Input / Output
USB2.0 High Speed (Mini B USB)
Power
-
- Input Voltage
+5 Vdc through USB connector or 12Pin connector
- Consumption
Less than 350 mA
Dimensions
50 (W) x 50 (H) x 35.8 (D) mm
Lens Mount
CS Mount
Input / Output Connector
12 Pin Connector (Hirose) / 2.5 mm Pin Jack
Tripod
1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top and bottom case, 2-M4 depth 4 screw holes on both side of case
Weight
Approximately 115g
Temperature
-
- Operational
Temperature: 0 to 40 deg. C, RH: 0 to 85% (No Condensation)
- Storage
Temperature: -30 to 65 deg. C, RH: 0 to 90% (No Condensation)
Vibration
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS
RoHS Compliant
 

USB 3.0 and 2.0 Cameras
Features

·         Color or Monochrome VGA ~ UXGA Resolution

·         Low Light Extended Integration (w/ Complex Noise Reduction)

·         Variable Partial Scan and Clock Speed Control

·         Drawing / Annotation & Horizontal and Vertical Flip

·         Standard USB or Lock Type Connectors

·         DirectX, Twain, Linux, and Halcon Drivers

AH and ASH Models

·         Precision Case w/ Heat Sink Design and LED Indicator

·         Machine Vision Features

- Triggering (Hardware or Software Base)

- Integrated End Signal, Readout Signal Control

- 4 Configurable I/Os

USB 3.0 and 2.0 Series

High Performance, Versatile

These are compact, progressive scan, USB camera with a color or monochrome CCD, featuring software and / or hard triggering , image capture, digital zoom and a feature-rich user based menu set up and control. This series is available with a top or rear USB connector. Sentech USB cameras include a SDK, Direct X, Twain and Linux drivers, as well as the Sentech Viewing Software.

 

 
 

 

 

 
 

Recently Viewed Items