Shopping Bag
Sentech USB 2.0 (Triggered) Color Camera STC-TC83USB-AH
Sentech USB 2.0 (Triggered) Color Camera STC-TC83USB-AH

Sentech USB 2.0 (Triggered) Color Camera STC-TC83USB-AH

Please email for Price Quote and Options
Part Number:STC-TC83USB-AH
Sentech USB 2.0 (Triggered) Color Camera STC-TC83USB-AH
 

XGA, Color Camera

The STC-TC83USB-AH is a compact, progressive scan, XGA, USB cased camera with a 1/3” color CCD, featuring 30fps, software and hardware triggering, image capture, digital zoom and a feature-rich user based menu setup and control. This cased camera is the same as the ASH model except that the USB signal is output over the USB connector. Sentech USB cameras include a SDK, DirectX, Twain and Linux driver, as well as the Sentech Viewing Software.

·         1/3" CCD Image Sensor, XGA (0.8 Megapixel)

·         Output over USB Connector, 30fps

·         Hardware & Software Trigger

Name

Specifications

Model No
STC-TC83USB-AH
Imager
1/3” Interline XGA Color Progressive CCD: ICX204AK
Total Picture Element
1077 (H) x 788 (V)
Active Picture Element
1024 (H) x 768 (V)
Chip Size
5.80 (H) x 4.92 (V) mm
Cell Size
4.65 (H) x 4.65 (V) µm
Scanning System
Progressive
Scanning Methods
Full Scanning, 1/1 Partial Scanning, 1/2 Partial Scanning, 1/4 Partial Scanning, Variable Partial Scanning
Pixel Frequency
29.5 MHz (Normal) / 14.75 MHz (1/2 clock) / 7.375 MHz (1/4 clock)
Maximum Frame Rate
-
- Full Scanning
29.18 fps (Normal) / 14.59 fps (1/2 clock) / 7.295 fps (1/4 clock)
- 1/2 Partial
60.02 fps (Normal) / 30.01 fps (1/2 clock) / 15.00 fps (1/4 clock)
- 1/4 Partial
120.35 fps (Normal) / 60.175 fps (1/2 clock) / 30.087 fps (1/4 clock)
Resolution
1024 (H) x 768 (V) (Full Scanning) 1024 (H) x 344 (V) (1/2 Partial Scanning) 1024 (H) x 136 (V) (1/4 Partial Scanning)
S/N Ratio
≤ 10 digit (Factory Default Gain Setting)
Minimum Scene Illumination
5.28 Lux at F1.2
Sync System
Internal
Electronic Shutter
Auto / Manual (Software Selectable)
Gain
Auto / Manual (Software Selectable)
Gamma
Manual (Software Selectable)
White Balance
Auto / Manual / One shot (Software Selectable)
Trigger Mode
Free-run / Edge Preset Trigger / Pulse Width Trigger / Start & Stop Trigger (Software selectable)
Input / Output
USB2.0 High Speed
Power
-
- Input Voltage
+5 Vdc through USB connector or 12Pin connector
- Consumption
Less than 330 mA
Dimensions
50 (W) x 50 (H) x 35.8 (D) mm
Lens Mount
CS Mount
Input / Output Connector
12 Pin Connector (Hirose) / 2.5 mm Pin Jack
Tripod
1/4”-20UNC depth 7 screw hole on top and bottom case, 4-M4 depth 4 screw holes on top, bottom and both side of case
Weight
Approximately 130g
Temperature
-
- Operational
0 to 40 deg. C
- Storage
-30 to 65 deg. C
Vibration
20 Hz to 200 Hz to 20 Hz (5 min. /cycle), acceleration 10G, 3 directions 30 min. each
Shock
Acceleration 70G, half amplitude 6 ms, 3 directions 3 times each
Standard Compliancy
EMS :EN61000-6-2, EMI :EN61000-6-3 (Class B)
RoHS
RoHS Compliant

USB 3.0 and 2.0 Cameras

Features

·         Color or Monochrome VGA ~ UXGA Resolution

·         Low Light Extended Integration (w/ Complex Noise Reduction)

·         Variable Partial Scan and Clock Speed Control

·         Drawing / Annotation & Horizontal and Vertical Flip

·         Standard USB or Lock Type Connectors

·         DirectX, Twain, Linux, and Halcon Drivers

AH and ASH Models

·         Precision Case w/ Heat Sink Design and LED Indicator

·         Machine Vision Features

- Triggering (Hardware or Software Base)

- Integrated End Signal, Readout Signal Control

- 4 Configurable I/Os

USB 3.0 and 2.0 Series

High Performance, Versatile

These are compact, progressive scan, USB camera with a color or monochrome CCD, featuring software and / or hard triggering , image capture, digital zoom and a feature-rich user based menu set up and control. This series is available with a top or rear USB connector. Sentech USB cameras include a SDK, Direct X, Twain and Linux drivers, as well as the Sentech Viewing Software.

 

 
 

 

 

 
 

Recently Viewed Items